Medeli AKX10 - Using the Vocoder Effect

136
Using Vocoder
A vocoder is an effect which processes the microphone input sound to produce a robot-like vocal effect. You can trigger
the vocoder with a keyboard part and use the pitch to process your voice.
Add a vocoder to the microphone as follows:
1. In Vocal mode, turn on the microphone effect option. Press the name to bring up the pop up menu.
Select “Vocoder” as the current effect type and select one of the vocoder types from the list. Press “OK” to save and
exit.
2. Select the keyboard part used to trigger the vocoder. Press the Part name on the top right to select a Part, and make
sure that keyboard Part has been turned on.
3. Speak or sing while playing the keyboard. The vocoder you selected will trigger the note pitch and modulate your
voice.
Microphone
AKX10_OM05_EN_190816.indd 136 2019/8/16 13:38