Function Menu
Beat
Press [FUNCTION] key to enter the menu of function.
The default option of the menu is "BEAT".
Everytime when you enter the menu, it will return to
the option that you selected last time.
Press [FUNCTION] key to select the option you would
like to set.
Use the [+] / [-] button to set the parameter.
The option and the parameters are indicated on the
right:
NOTE:
If there is no action 5 seconds after pressing
the [FUNCTION] key ,it will quit the function
menu automatically.
Option LCD Display Range Default
BEAT BET 04 0, 2...9 4
SPLIT POINT SPT 19 1...61
#
19( F3)
MIDI IN CHI ALL 01...16, ALL ALL
MIDI OUT CHO 01 01...16 01
BANK SELECT BAK 01 01...128 01
Press the [FUNCTION] button to enter the BEAT
sub-menu.
The LCD displays the current beat value.
Use [+] / [-] to select the beat value.
The beat value includes: 0, 2-9, 9 types of value.
LESSON
CHORD
DICT.
L & R
FUNCTION
Split Point
Press the [FUNCTION] button to enter SPLIT POINT
sub-menu. The LCD displays the current split point
value.
Use [+] / [-] to select the beat value. The keyboard
can be also used to change the split point.
The key of the split point is the part of the left area.
MIDI IN
RECEIVE can be used to set the channel of MIDI IN.
Channel 1-16 can be selected by pressing [+] /[-]
button.
The default setting is ALL.
23
To Next Page
Loading...
