RX8000 Integrated Receiver/Decoders
1553-FGB 101 759 Uen K
www.mediakind.com
Once Edit is selected use the (Up) and (Down) keys to toggle the MPE components within the
service and the USER PID and NO SELECTION options.
3.17.6.7.2. Filter MAC / User PID
This menu allows the user to select either a MAC address to filter on or a user PID to use when the
MPE component selection is set to USER.
SERVICE |FILTER MAC: 00:00:00:00:00:00
4.9.2 |USER PID: 0000
Once Edit is selected Use the (Back) and (Forward) keys to toggle between FILTER MAC and
USER PID.
Use the (Up) and (Down) keys to increment each element in the MAC address and increment
or decrement the USER PID value.
3.17.6.7.3. Component Selection
This menu allows the user to turn MPE de-encapsulation either off or on.
SERVICE |MPE ENABLE: ENABLE
4.9.3 |
Once Edit is selected use the (Up) and (Down) keys to toggle the MPE ENABLE status between
the values ENABLE and DISABLE.
3.17.6.7.4. Port 1 Enable and Status
This menu allows the user to view the link status of the MPE port and to enable or disable the
transmission of MPE de-encapsulated IP data from that port.
MPE PORT 1 |PORT 1 MPE ENABLE: ENABLE
4.9.4.1 |PORT 1 MPE LINK STATUS: DOWN
Once edit is selected use the (Up) and (Down) keys to toggle the PORT 1 MPE ENABLE status
between the values ENABLE and DISABLE.
3.17.6.7.5. Port 2 Enable and Status
This menu allows the user to view the link status of the MPE port and to enable or disable the
transmission of MPE de-encapsulated IP data form that port.
MPE PORT 2 |PORT 1 MPE ENABLE: ENABLE
4.9.4.1 |PORT 1 MPE LINK STATUS: DOWN
To Next Page
