MEDIATEK MT7612 - Country Region Code for 2.4 G band (0 x39)

loginid=danielwu@synnex.com.tw,time=2013-11-28 11:59:39,ip=58.250.71.129,doctitle=MT7612-EEPROM Content v1_02_guideline.pdf,company=Synnex Electronics HK Limited 聯強電子_RLT
MT7612
EEPROM Content
Confidential B
MediaTek Confidential
© 2013 MediaTek Inc.
Page 15 of 32
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
3 52, 56, 60, 64, 149, 153, 157, 161
4 149, 153, 157, 161, 165
5 149, 153, 157, 161
6 36, 40, 44, 48
7
0, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149,
153, 157, 161, 165
8
6, 60, 64
9
0, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161,
165
10
0, 44, 48,149, 153, 157, 161, 165
11
0, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
12
0, 44, 48, 52, 56, 60,
64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
13
6, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
14
0, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
15
153, 157, 161, 165
, 169, 173
16
0, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149,
153, 157, 161, 165, 169, 173
30
al Channels (Refer to 0x11A
h~11Dh)
Note: 1.) If set to Index #12, it will also turn on 802.11h and Carrier Detection by default
2.) The index value is decimal system.
2.6 Country Region Code for 2.4G band (0x39)
Default value = FFh, which means read from INF and registry, more flexible than reading
from EEPROM, this is our current InstallShield CCS implementation. We do not
recommend customers to read SKU from EEPROM. Value FFh is the default value.
CountryCode— Specify the domain code, can be FFh or one of the followings,
Index Support Channels
0 CH 1 ~ 11
1 CH 1 ~ 13
2 CH 10 ~ 11
3 CH 10 ~ 13
4 CH 14
5 CH 1 ~ 14
MEDIATEK CONFIDENTIAL
FOR danielwu@ synnex.com.tw USE ONLY