loginid=danielwu@synnex.com.tw,time=2013-11-28 11:59:39,ip=58.250.71.129,doctitle=MT7612-EEPROM Content v1_02_guideline.pdf,company=Synnex Electronics HK Limited 聯強電子_RLT
MT7612
EEPROM Content
Confidential B
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
ii. 1: Board with external LNA for 2.4GHz band must set this bit to 1 (default value).
4. 0x36[3]: For 5GHz LNA setting
i. 0: Board without external LNA for 5GHz band must set this bit to 0.
ii. 1: Board with external LNA for 5GHz band must set this bit to 1.
2.40 TSSI off 2.4/5G TX power SKU (0xF7, 0xF8)
Unit: 0.5dBm
Driver will use this value as reference target power of SKU function.
TSSI off:
If 5G 54M target power is 13dBm, 13dBm= 13*2 = 26(dec) = 0x1A(hex)
0xF8 offset should be filled with 0x1A value.
Offset
Description
0xF7 TSSI off 2.4G TX power (54Mbps, dBm)
0xF8 TSSI off 5G TX power (54Mbps, dBm)
MEDIATEK CONFIDENTIAL
FOR danielwu@ synnex.com.tw USE ONLY
To Previous Page
Loading...