MediCapture MVR - Mechanical, Environmental, and Compliance; Mechanical and Environmental Details; Compliance and Certification Marks

MVR/MVRPRO-UG01-EN-200727
<30>
MVR / MVR Pro User Guide - English
Compliance and
Certication
EN 60601-1:2006 + A1:2013 + A12:2014, EN 60601-1-2:2015, EN 60601-1-6:2010+A1:2015,
EN 50581:2012
Classication Class I Equipment / Mode of operation: continuous
No AP/APG. No Applied Part.
Note: These specications are subject to change without notice.
Medical Devices Directive 93/42/EEC
Essential Requirements of the Radio Equipment Directive (RED) 2014/53/EU
Medical – General medical equipment as to electrical shock, re and mechanical
hazards only in accordance with IEC 60601-1, ANSI/AAMI ES 60601-1 (2005) +
AMD (2012) and CAN/CSA-C22.2 No. 60601-1 (2014)
This device complies with FCC Part 15 Class B of the FCC emission Rules
FCC ID: 2AFDI-ITCNFA324
IC: 9049A-ITCNFA324
RoHS compliant
Mechanical MVR / MVR Pro with touchscreen monitor:
Dimensions (WxDxH): 173 x 153 x 50mm (without antenna attached), Weight: 1,28kg
MVR without touchscreen monitor:
Dimensions (WxDxH): 160 x 150 x 40mm (without antenna attached), Weight: 1,00kg
Environmental Operating: ambient temperature -20° to +40° C, air pressure 700 to 1060hPa,
humidity 30 to 75% (non-condensing)
Storage and transportation: ambient temperature -40° to +85° C, air pressure 700 to 1060hPa,
humidity 0 to 93% (non-condensing)
Protection against
penetration of liquids
IP20 (= not protected)
Degree of protection
in the presence of
ammable mixtures
This device is not protected against explosions.
(Do not operate this device in ignitable atmosphere)
Power AC 100-240V, 0.4-0.2A, 50/60Hz, 3-prong AC jack
Fuse T1AH, 250V
Kit Contents MVR / MVR Pro recorder, USB ash drive, HDMI cable, Wi-Fi / BT antenna,
HDMI to DVI adapter, Split Remote Cable Adapter, Power Cable, IR Remote Control,
Rubber Feet (4), User Guide (English)