To Next PageTo Next Page
Need help?Do you have a question about the Medicus Gluco Dr. Plus and is the answer not in the manual?
General| Blood Sample | Capillary whole blood |
|---|---|
| Measuring Time | 5 seconds |
| Measuring Range | 20-600 mg/dL |
| Memory | Yes |
| Sample Volume | 0.5 µL |
| Weight | 50 g (without batteries) |
| Power Source | 2 x AAA batteries |
| Battery | Two AAA batteries |
| Operating Conditions | 10-40°C, 10-90% RH |
| Storage Conditions | 10 ~ 90% RH |
| Memory Capacity | 500 test results |
Defines the intended use for self-testing and professional use of the blood glucose monitoring system.
Lists essential precautions for the correct and safe operation of the blood glucose meter.
Lists specific handling, storage, and usage precautions for the test strips.
Lists the main components used in the blood glucose testing procedure.
Guides through inserting the test strip and obtaining the blood sample from the fingertip.
Explains the correct method for applying blood to the test strip's yellow window.
Explains "HI" and "Lo" results and the recommended actions to take.
Explains messages for high/low results, stored data, and battery status.
Covers battery status, temperature errors, and basic system malfunctions.
Details error codes related to test strip insertion and sample application issues.
Explains error codes for meter and strip connection problems.
Addresses causes and solutions for the meter failing to power on.
Provides troubleshooting steps for when the meter doesn't initiate after blood application.
