Medicus Gluco Dr. Plus - Applying Blood Sample to Test Strip

19
Apply the round drop of blood to the side edge of the yellow window of the
test strip and then blood drop will be absorbed into the narrow channel.
Touch and hold the blood drop to the side edge of the yellow window of test
strip until blood completely lls the conrmation window and the meter beeps.
Then, your meter will start the countdown.
Apply the Blood Sample
You shoul d ap ply b lood to th e ar row on th e test s trip a s direc ted.
- Do not put blood on the top of the test strip
- Apply the blood drop to the side edge of the yellow
window of the test strip.
- If there is an insucient amount of blood in conrmation
window, you may get inaccurate test result. See the picture in
the left for proper application of the required blood volume
to perform the test properly.
- Even if the meter begins the countdown despite the fact that
the conrmation window is not completely lled, do not
apply more blood to the test strip.
Discard the test strip and repeat the test with a new test strip.
