Medion P2010 D User Manual

15 of 64
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
5.7. Connecting Speakers/Audio Output
Product Diagram position: G
Here you can connect your active speakers for replaying or audio connection
cables for recording. Please refer to the user‘s guide of your stereo installation for
information about which connector you should use (usually Line In or Aux)
 Connect the cable with the 3.5 mm stereo jack plug into the green socket
marked with the symbol.
PLEASE NOTE!
You can also connect a sound system to the audio socket.
You can also connect headphones to the analogue audio gateway.
Product Diagram position: G
 Connect the cable with the 3.5 mm stereo jack plug in the green socket.
WARNING!
The use of headphones/earphones with a high volume can lead to
lasting damage to your hearing. Set the volume to the lowest level
before reproducing any sound. Start the sound reproduction and
increase the volume to the level that is comfortable for you. Changing
the basic settings of the equalizer can also cause damage to the
hearing of the listener.
It can cause damage to the hearing ability of the listener if a device
is operated through earphones with an increased volume for a long
period.
8806 Aldi AUS RC2 Content.indd 158806 Aldi AUS RC2 Content.indd 15 07.11.2012 12:06:4707.11.2012 12:06:47

Medion P2010 D Specifications

General

Brand	Medion
Model	P2010 D
Category	Desktop
Language	English