EasyManua.ls Logo

Meec tools 740-034 - Control Panel and Features

Meec tools 740-034
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
37
1. Disassembly cover
2. Choke
3. Fuel vent cap
4. Fuel tank cap
5. Control panel
6. Engine switch
7. Fuel valve
8. Starter grip
9. Spark plug disassembly cover
10. Muffler shield
11. Output indicator light
12. Overload indicator light
13. Oil alarm indicator light
14. Ground terminal
15. AC output
16. Smart throttle
17. DC circuit breaker
18. DC output
Engine power switch
ON –The engine can be started
OFF – The engine stops
Smart throttle
ON – Minimum fuel consumption and lowest possible noise.
OFF - Smart throttle is off and does not operate no matter what the load. Smart throttle should be OFF
when using high power appliances.
DC circuit breaker
The DC circuit breaker shuts off the charging current in the 12 V outlet when overloaded. Check the
connected equipment’s load if the circuit breaker is activated.

Table of Contents