18
This value should only be set when the ionisers have been cleaned,
otherwise the performance of the system will be reduced.
During use, ionisers become contaminated which reduces their performance.
Seng the Rate
The 233v4 features a variable output frequency. The frequency that the
233v4 should be set to depends on the ionising product and the distance to
the target object.
Frequency Rate (Hz)
Suggested Frequency Vs Operang Distance for 971/233v4
Ionising Nozzles:
Ionising Nozzles and Air Guns (251,261,271) should be used from 10 to 20 Hz.
To Next Page
Loading...