General
MIB System
System Name
This section is to give a name to the NetAgentA.
System Contact
This section is to give a name to the administrator.
System Location
This section is to set NetAgentA location.
SNMP UDP Port
NetAgentA SNMP Port
：
The port that NetAgnetA receive and send SNMP command. (Default is 161)
Trap Receive Port：
The port to receive trap. (Default is 162)
SNMPv3 Engine ID
SNMPv3 Engine ID Format Type：
When using SNMPv3, NetAgentA requires to have its Engine ID for identification to
generates authentication and encryption key . Format type can be select from the drop
down list with option of MAC Address / IPv4 / IPv6 / Manual
Once click on Apply, NetAgentA will reboot
SNMPv3 Engine ID Text：
SNMPv3 Engine ID content
To Next Page
Loading...