Need help?Do you have a question about the Mega System Technologies NetAgentA and is the answer not in the manual?
General| Brand | Mega System Technologies |
|---|---|
| Model | NetAgentA |
| Category | UPS |
| Language | English |
NetAgentA is an SNMP card for UPS monitoring, remote control, and SMS notifications.
NetAgentA enables network UPS monitoring, shutdown utilities, and environmental monitoring.
Details NetAgentA Mini models, package contents, and supported interfaces.
Explains status and RJ45 Ethernet LED indicators on NetAgentA Mini.
Guide to installing NetAgentA software utilities: Netility, ClientMate, SNMPView, and iMConfig.
Explains logging in via web or HyperTerminal using HTTP/HTTPS/SSH/Telnet.
Step-by-step guide for connecting NetAgentA, installing Netility, and logging in.
Instructions for installing and using Netility for NetAgentA configuration and device search.
Netility automatically searches and lists available online NetAgentA devices.
Displays hardware, firmware version, and MAC address for a selected NetAgentA.
Procedure to access the NetAgentA's webpage via Netility.
Configuring IP address and network protocols (HTTP/HTTPS/Telnet/SSH) for NetAgentA.
Steps for upgrading or re-loading NetAgentA firmware using Netility.
Overview of web interface sections: UPS Status, System Status, UPS Information, Network Status.
Allows remote execution of UPS tests and actions.
Configuration for UPS communication type, battery details, and replacement date.
Settings for scheduling UPS tests, types, and data logging intervals.
Sets thresholds for connection loss, critical load, temperature, and battery capacity.
Configures UPS actions based on events and time ranges for shutdown.
Enables shutting down network servers remotely based on UPS events.
Sets daily and specific date UPS turn-on/off times.
Configures IPv4, IPv6, Ethernet, Dynamic DNS, and PPPoE network settings.
Configures NetAgentA wireless network using a USB wireless dongle.
Guide to setting up WPS connection between NetAgentA and wireless router.
Configuring NetAgentA SNMP settings for Network Management System (NMS).
Manages access permissions for NetAgentA based on IP, version, community, and permissions.
Configures destination IP addresses and trap types for receiving SNMP traps.
Configures email server, port, SSL, sender address, and authentication for notifications.
Configures SMS service using GSM/GPRS/CDMA modem for event notifications.
Configures NetFeeler sensors for environmental and security monitoring.
Sets system time, language, and restart options for NetAgentA.
Saves, restores, or resets NetAgentA configuration settings.
Displays a record of all events with date/time and detailed descriptions.
Records SMS sent, including mobile number, date/time, and content.
Records detailed UPS data: voltage, frequency, load, and temperature.
Records UPS Self-Test results in graphic format, showing battery capacity and load.
Displays NetAgentA devices with serial, MAC, hardware, firmware, and IP addresses.
Manages log files, allowing download and deletion of .dat files.
Shows communication status between NetAgentA and UPS via Sent/Received commands.
Provides assistance and displays NetAgentA hardware/firmware and serial number.
Configures FTP server for firmware updates and allows manual or scheduled upgrades.
Steps for logging into the FTP server to upload firmware files.
To Next Page