MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-23
MAC/MTT-OPS(CL)-1
26 FEB 2019
6. Cab Control SYSTEM/POWER Switch – ON
7. MONITOR/BFV Switch – ON
8. DUMP BAR Switch – ON
9. DRAIN Switch – ON
10. Water Cannon Nozzle – Pointed fully DOWN
11. Cab Control SYSTEM/POWER Switch – OFF
12. Turn engine off.
13. Hose Reel – DRAIN
a. Hose – UNWIND
b. Nozzle – Fully OPEN
c. Gate Valve – OPEN
d. Allow water to drain.
e. Hose – REWIND
f. Gate Valve – CLOSED
g. NOZZLE – CLOSED
14. Check to ensure all water has drained from tank.
TO REACTIVATE UNIT:
1. Lubricate water pump bearings as instructed in
the Maintenance (-2) technical manual.
To Next Page
Loading...