Megger BITE 3 User Manual

Test Procedures
AVTMBITE 3 Rev 8 April 2014
21
5. Continue testing cells and straps as necessary, making appropriate
connections and pushing the red "test" button on the top panel of the BITE
3 to start the measurements.
6. Once the measurement is complete, continue testing until all cells/jars have
been tested.
7. Follow Step Four, Perform Post-Test Activities from above.
Reviewing and retesting
Follow the same procedure as described above.

Megger BITE 3 Specifications

General

Brand	Megger
Model	BITE 3
Category	Test Equipment
Language	English