Maintenance and Trouble Shooting
AVTMBITE 3 Rev 8 April 2014
29
Printer (Optional)
Configuration
To print a paper copy of the existing printer settings:
While holding down the "On-Line" switch, turn on the printer. The following list
will print (factory default settings shown).
Figure-5: Printer Configuration Printout
If you want to leave the settings as they are, press the "FEED" switch.
If you need to change a setting, press the "ON LINE" switch to enter the
reconfiguration mode. For each group of switches, press the "FEED" switch if
all the settings are okay. Press the "ON LINE" switch if a setting needs to be
changed. At an individual setting, press the "FEED" switch if it is okay and press
"ON LINE" to change that setting.
To change printer language, see page 18 in the Printer Manual.
To Next Page
Loading...
Need help?
General
