G SAFETY WARNINGS
■
Use of rubber gloves is good safety practice even if the equipment is properly operated and
grounded.
■
Safety is the responsibility of the operator.
■
Use extreme caution when using the instrument around energised electrical equipment.
■
Do not attempt to use the ground tester to twist or pry the ground electrode or ground wire away
from the equipment being grounded.
■
All metal objects or wires connected to the electrical system should be assumed to be lethal until
tested, the grounding system is no exception.
Symbols used on the instrument are:
F Caution: Risk of Electric Shock
G Caution: refer to accompanying notes
t Equipment protected throughout by Double Insulation (Class II)
c EN 61010-2-032 CAT III 300V, CAT II 600V Pollution Degree 2
1
To Next Page
Loading...
Need help?
General
