3
Symbols used on the instrument
G
Caution: refer to user manual
F
Caution: risk of electric shock
Equipment protected throughout by Double Insulation.
Line Power / mains
c
Equipment complies with current EU directives.
Equipment complies with current “C tick” requirements.
Do not dispose of in the normal waste stream.
g
gg
g Functional Earth
Universal Serial Bus (USB)
CAT IV
Measurement category IV: Equipment connected
between the origin of the low-voltage mains supply and
the distribution panel.
CATIV applies to voltage measurement function of
these instruments.
CAT III
Measurement category III: Equipment connected
between the distribution panel and the electrical
outlets.
CAT II
Measurement category II: Equipment connected
between the electrical outlets and the user’s
equipment.
WEEE Directive
The crossed out wheeled bin symbol on the instrument and on
the batteries is a reminder not to dispose of them with general
waste at the end of their life.
Megger is registered in the UK as a Producer of Electrical and
Electronic equipment. The registration no is; WEE/HE0146QT.
Users of Megger products in the UK may dispose of them at
the end of their useful life by contacting B2B Compliance at
www.b2bcompliance.org.uk or by telephone on 01691 676124.
Users of Megger products in other parts of the EU should
contact their local Megger company or distributor.
Battery Disposal
Batteries in this product are classified as Industrial Batteries
under the Batteries Directive. Please contact Megger Ltd for
instructions on the safe disposal of these batteries.
For disposal of batteries in other parts of the EU contact your
local distributor.
Megger is registered in the UK as a producer of batteries.
The registration number is BPRN00142.
For Further information see www.megger.com
To Next Page
Loading...
Need help?
General
