www.megger.com
5
Product Safety Category
CATII 300 V - MEASUREMENT CATEGORY II Equipment connected between the electrical outlets and the user’s equipment.
G 230 V ac powered Leakage testing: Connecting the PAT150 to a 230 V ac supply will automatically switch the leakage tests from a 40 V ac test to a mains powered 230 V ac test. Any
leakage testing performed with 230 V ac connected will operate the equipment under test. Ensure the equipment under test is properly secured and in a safe condition prior to running a
230 V ac leakage test
WEEE DIRECTIVE
The crossed out wheeled bin symbol placed on Megger products is a reminder not to dispose of the product at the end of its life with general waste.
Megger is registered in the UK as a Producer of Electrical and Electronic Equipment. The Registration No is WEE/HE0146QT
For further information about disposal of the product consult your local Megger company or distributer or visit your local Megger website.
Symbols used on the instrument
G Caution: refer to accompanying notes.
F Danger: Mains voltage present during testing
c Equipment complies with relevant EU Directives
Equipment complies with ‘C tick’ requirements
Caution: Earth pins of the 230 V test socket will become hazardous if test
lead P1 is in contact with hazardous voltages during continuity test.
f Fuse failure
This equipment should be disposed of as electronic waste
Battery type fitted
Do not connect to 230 V supply
Caution: Earth pin of the 230 V test socket will become hazardous if test
lead P1 is in contact with hazardous voltages during continuity test
To Next Page
Loading...
Need help?
General
