Name: Megger PAT120 Series
Brand: Megger
Rating: 4 (1 reviews)

To Next Page

To Previous Page

www.megger.com

Power cord test (PAT120, 150)

Testing a standard power cord

i) ii) iii) iv)

Insulation test @ 500 V

Insulation test @ 250 V

>2 s

v) vi)

NOTE : For power cords longer than 5m the test can be re-run with a 1.0W pass limit by pressing the test button with 5 seconds of the continuity test failing – refer to page 13

Table of Contents2
Unpacking the Carton3
Safety Warnings4
Symbols Used on the Instrument5
Symbols Used on the Connection Panel6
Instrument Layout7
PAT120 and Display Information7
PAT150 and Display Information7
Measurement Symbols8
Instrument Buttons9
User Guide INSTRUCTION Symbols9
Carry Strap Fitting and Removal10
Switching on / off11
Class I Test (PAT120, 150) Using Substitute Leakage @ 40 V Ac12
Class I Test (PAT120, 150) Using Mains Leakage @ 230 V Ac14
Class II Test (PAT120, 150) Using Substitute Leakage @ 40 V Ac15
Class II Test (PAT120, 150) Using Mains Voltage Leakage @ 230 V Ac16
Power Cord Test (PAT120, 150)17
Extension Lead Test (PAT120, 150)18
Portable RCD Test (PAT150)19
Fixed Equipment Testing20
Fail Handling21
Quick Test Examples23
SELV Measurement Within Quick Test (QT)25
To Exit Quick Test (QT) Mode25
Setup (Pat120, Pat150)26
Changing PASS Limits and Test Times26
Continuity Lead Null27
RCD Configuration28
Factory Reset to Default Settings29
Region Selection30
International Model Variations31
Battery and Fuse Replacement (PAT120, 150)32
Battery Replacement32
Fuse Replacement33
Preventive Maintenance33
Specification34

Megger PAT120 Series User Manual

Table of Contents

Other manuals for Megger PAT120 Series

Questions and Answers:

Megger PAT120 Series Specifications

Related product manuals

Brand	Megger
Model	PAT120 Series
Category	Test Equipment
Language	English