Name: Megger PAT120 Series
Brand: Megger
Rating: 4 (1 reviews)

To Next Page

To Previous Page

www.megger.com

International model variations:

Continuity retest after fail (PAT120, PAT150 DE, & CH models only)

When a continuity test fails to meet the pre-set continuity resistance pass limit of 0.3 W, the test can be run again within 5 seconds at the higher 1.0 W limit.

Example Class I continuity FAIL. Display shows:

to retest at 1.0 W limit or

to FAIL test

Table of Contents2
Unpacking the Carton3
Safety Warnings4
Symbols Used on the Instrument5
Symbols Used on the Connection Panel6
Instrument Layout7
PAT120 and Display Information7
PAT150 and Display Information7
Measurement Symbols8
Instrument Buttons9
User Guide INSTRUCTION Symbols9
Carry Strap Fitting and Removal10
Switching on / off11
Class I Test (PAT120, 150) Using Substitute Leakage @ 40 V Ac12
Class I Test (PAT120, 150) Using Mains Leakage @ 230 V Ac14
Class II Test (PAT120, 150) Using Substitute Leakage @ 40 V Ac15
Class II Test (PAT120, 150) Using Mains Voltage Leakage @ 230 V Ac16
Power Cord Test (PAT120, 150)17
Extension Lead Test (PAT120, 150)18
Portable RCD Test (PAT150)19
Fixed Equipment Testing20
Fail Handling21
Quick Test Examples23
SELV Measurement Within Quick Test (QT)25
To Exit Quick Test (QT) Mode25
Setup (Pat120, Pat150)26
Changing PASS Limits and Test Times26
Continuity Lead Null27
RCD Configuration28
Factory Reset to Default Settings29
Region Selection30
International Model Variations31
Battery and Fuse Replacement (PAT120, 150)32
Battery Replacement32
Fuse Replacement33
Preventive Maintenance33
Specification34

Megger PAT120 Series User Manual

Table of Contents

Other manuals for Megger PAT120 Series

Questions and Answers:

Megger PAT120 Series Specifications

Related product manuals

Brand	Megger
Model	PAT120 Series
Category	Test Equipment
Language	English