Megmeet MV600L Series - Drive Parameters

39
can not be reset until 200s later;
3. The keyboard displays AL.xxx
in case of any fault (e.g. in case of
the contactor fault, keyboard
displays Er.xxx if there is
protection action, and displays
AL.xxx if continuing running with
alarm)
P97.16
The
second
fault type
The second
fault type
The same as P97.15
1 0 × √ *
P97.17
The third
fault type
The third
fault type
The same as P97.15
1 0 × √ *
P97.18
DC bus
voltage at
the 3rd
fault
DC bus
voltage at
the 3rd fault
0~999V 1V 0V × √ *
P97.19
Actual
current at
the 3rd
fault
Actual
current at the
3rd fault
0.0~999.9A 0.1A 0.0A × √ *
P97.20
Running
frequency
at the 3rd
fault
Running
frequency at
the 3rd fault
0.00Hz~3000.00Hz 0.01Hz 0.00Hz × √ *
P97.21
Drive
running
status at
the 3rd
fault
Drive running
status at the
3rd fault
0~FFFFH
1 0000 × √ *
Group P98: Drive parameters
P98.00
Serial No. Serial No.
0~FFFF 1 605 × √ *
P98.01
Software
version
No.
Software
version No.
0.00~99.99 1 1.00 × √ *
P98.02
User-cust
omized
version
No.
User-customi
zed version
No.
0~9999 1 0 × √ *
P98.03
Rated
capacity
Rated
capacity
Output power (0~999.9kVA)
(set by the model automatically)
0.1kVA
Manufact
urer
setting
× √ *
P98.04
Rated
voltage
Rated
voltage
0~999V
(set by the model automatically)
1V
Manufact
urer
setting
× √ *
P98.05
Rated
current
Rated
current
0~999.9A
(set by the model automatically)
0.1A
Manufact
urer
setting
× √ *