51
Chapter 5 MV600L Series Drive Special for Lifting
Debugging Guide
MV600L typical application wiring and function code setting.
MV600L is a special drive for lifting industry developed by Shenzhen Megmeet Drive Technology Co., Ltd. It
can be divided into four operating modes according to the working station: Slewing mode, luffing mode,
closed loop lifting mode, open loop lifting mode. Mode selection is carried out by [P00.07]. Select different
mode, it will cause automatic adjusting of the corresponding logic and the associated function code defaults,
and closing unrelated function code, eliminating the need for users to manually change each of the relevant
function codes, see the following application table, which is a great simplification for the use of the customer
as well as subsequent maintenance.
Lifting industry have a high drive driven motor performance requirements, therefore vector control is adopted
under general cases. So you need to accurately obtain the internal parameters of the motor. In addition to the
motor parameters auto-tuning is performed by [P03] group , based on past usage summary we store some
common motor parameters for lifting industry in the drive, you can directly call through [P00.05] and kept
continuously updated.
So for general lifting applications, we only need to know the value of [P00.05] and [P00.07] to meet most
applications. How to perform motor parameter auto tuning, please see [P03.25] for details.
To Next Page
Loading...