70
MV600L-4T45 >= 35.0 >= 10 /
MV600L-4T55 >= 43.0 >= 7.5 /
MV600L-4T75 >= 60.0 >= 6 /
MV600L-4T90 >= 72 >= 5.5 MDBU-4-200, 1
MV600L-4T110 >= 88 >= 5.5 MDBU-4-200, 1
MV600L-4T132 >= 104 >= 3.6 MDBU-4-280, 1
MV600L-4T160 >= 128 >= 2.8 MDBU-4-200, 2
MV600L-4T200 >= 144 >= 2.8 MDBU-4-200, 2
MV600L-4T220 >= 176 >= 2.0 MDBU-4-280, 2
MV600L-4T280 >= 216 >= 2.0 MDBU-4-280, 2
MV600L-4T315 >= 264 >= 1.8 MDBU-4-200, 3
MV600L-4T355 >=284 >= 1.5 MDBU-4-280, 3
MV600L-4T400 >= 312 >= 1.5 MDBU-4-280, 3
The connecting wire between the braking units and drive, and between the braking units and braking resistors
shall be within 5m. If it is longer than 5m, twisted pair wire shall be adopted. The maximum wire length is 10m.
To Next Page
Loading...
Need help?
General
