7. Reposition the “max level detection
plate”.
With the max level detection plate
down, check that the bill level flag is
green. If the flag shows red remove
some bills until the flag turns green
with the detection plate down.
Caution, do not over fill the
Loader Cassette and do not force
the “max level detection plate”
closed.
8. Close the Loader Cassette by
slightly pressing the box (1),
inserting the key (2) and slightly
turning it clockwise (3), and
then fully turn the key vertical in
order to release the pressure
plate mechanism.
A “click” will occur after the key
is turned vertical and ensures
that the Loader Cassette is
correctly closed.
9. Put the Loader Cassette back
in place (1).
10. Lock the Interlock System with
lever (2) and lock (3) using the
key.
To Next Page
Loading...
