© 2009-2017 CPI. All rights reserved
BNR&BNA6 USER GUIDE
Information subject to change without
prior notice
5.2. BNR Bill path cleaning instructions
Out of service scenario due to dust in and around gears, belts, motors or optic
guides.
It is recommended to clean the BNR/BNA6 according to Maintenance Table.
Duration
Approx. 10 min.
The dust could be due to banknote fibers which accumulate around critical parts.
The recommended cleaning technique for the Main Module is to remove the dust with
a spray of compressed air.
NOTE: In some images, the power and USB cables are not depicted to enhance
overall clarity.
1. For this operation utilize a spray of filtered and
compressed air with a max pressure of 50 PSI (=3.5 bars).
To Next Page
Loading...
