© 2009-2017 CPI. All rights reserved
BNR&BNA6 USER GUIDE
Information subject to change without
prior notice
SAFETY INSTRUCTIONS
Expected use conditions: The MEI BNR/BNA6 products validate, denominate, store
and recycle banknotes. The MEI BNR/BNA6 is intended to be integrated as a
peripheral within a Host Machine.
IMPORTANT WARNING - HEAVY MATERIAL
MEI™ BNR/BNA6 can weigh more than >25 kg (>55 lb)
when completely assembled.
SAFETY INSTRUCTIONS
Before installing the BNR/BNA6 into a Host Machine, turn off
all power.
When installing or removing electronic boards observe all
ESD precautions to prevent damage.
Beware of hot surfaces!
STANDARDS CONFORMANCE
MEI BNR/BNA6 series products operate at Safety Extra Low Voltage level (SELV) as
defined in standard EN60950-1 «Safety of information technology equipment». They
may be designed into processing machines covered by this standard and complying
with IEC 60950-1 or EN 60950-1.
EMC notice: this digital device does not exceed the Class B limits according to EN
55022 and IEC/CISPR 22 limits for radio interference. In a domestic environment the
User may be required to take adequate measures.
To Next Page
Loading...
Need help?
General
