tracker. After doing so, the device will report its longitude and latitude by SMS with format as follows:
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50
Track on Demand
-Google Link
Remarks: Send this command to the tracker and you will receive an SMS with a http link. Click on the link then the location will
be shown directly on your mobile phone using Google Maps. For example:
http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329&ie=UTF8&z=16&iwloc=addr&om=1
(Note: Only smart phones and PDAs support this function.)
Remarks: To change user‟s password. ###### is the new password. Password should be 6 digits.
Remarks: To set interval for automatic timed report.
XXX is the interval in minutes. If XXX=000, turn off tracking by time.
In this example, the tracker will send location data back to your mobile phone every 30 minutes.
Remarks: Authorize phone numbers for the SOS button (input) for receiving location reports and SMS alarms.
F=0, to turn off this function (default);
F=1, to turn on the function of sending SMS reports/alarms to the authorized phone number.
T: Preset phone number. Max.16 digits.
Remarks: When the tracker speeds higher than the pre-set value, it will send an SMS to the authorized phone number for SOS.
XX is the preset value of speed and in 2 digits.
=00 , to turn off this function;
=[01, 20] (unit: 10Km/h).
In this example, when the tracker‟s speed is over 80km/h, an SMS alarm will be sent out.
Remarks: When the tracker moves out of a preset circle scope, it will send an SMS alarm to the authorized phone number for
SOS.
X is the preset radii to the tracker‟s original place
=0, to turn off this function
W000000,302,22.000000,-114.123456,3000,1,1
Remarks: Turn on Geo-fencing alarm. When the tracker moves in/out the preset scope, it will send an SMS alarm to the
authorized phone number for SOS.
To Next Page
Loading...
