51
ENGLISH
51
→ The device is ready for operation and water hardness is automatically set to
hardness level 1.
• Empty the drip tray and then reinsert it.
Notes
– The Melitta
®
Claris
®
water lter should not remain dry over an extended
period of time. We therefore recommend storing the Melitta
®
Claris
®
water
lter in the refrigerator in a glass of water when the appliance will not be in
use for extended periods.
– After inserting the Melitta
®
Claris
®
water lter excess active charcoal will be
washed out of the lter the rst time the appliance is rinsed out. This can
cause the rinse water to appear slightly grey in colour. Subsequently the
water will again be clear.