Melitta Caffeo Solo - Resetting the appliance to the default settings

5858
Display Brewing temperature
low
medium
(factory setting)
high
• Press the ON/OFF button to conrm the selected brewing
temperature.
→ All symbols in the display ash briey for conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
8.5 Resetting the appliance to the default settings
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 49).
• Simultaneously press both the button for coffee strength and the
ON/OFF button for more than two seconds.
→ All settings are now reset to the factory settings. The standby symbol
will ash briey for conrmation.
Overview of factory settings:
Function settings Factory settings
Water hardness Water hardness 4
Energy-saving mode
5 minutes
Auto-OFF function
1 hour
Brewing temperature
Medium