Melitta Caffeo Solo User Manual

5454
8 Function settings
8.1 Water hardness
Use the test strip provided to determine the water hardness in your area. Please
comply with the instructions on the test strip packaging. Water hardness is set to 4
in the factory. If you have inserted the Melitta
®
Claris
®
water lter, water hardness 1
is set automatically (see page 50).
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 49).
To maintain appliance quality, please adjust the water hardness as follows:
• Simultaneously press both the button for one-cup dispensing and
the button for two-cup dispensing for more than 2 seconds.
→ The standby symbol is ashing rapidly.
• Press the button for one-cup dispensing once to call up the menu
for adjusting the water hardness.
→ The symbol for the water lter is illuminated.
• Press the button for coffee strength several times to select among
the four possible degrees of water hardness.
→ Your water hardness selection according to the table is shown with the bean
symbols on the display.
Water hardness range Properties °dH °f
1:
soft 0 - 7.2 °dH 0 - 13 °f
2:
medium 7.2 - 14 °dH 13 - 25 °f
3:
hard 14 - 21.2 °dH 25 - 38 °f
4: ashing
very hard
(factory setting)
> 21.2 °dH > 38 °f

Melitta Caffeo Solo Specifications

General

Product type	Espresso machine
Self-cleaning	Yes
Capacity in cups	2 cups
Coffee input type	Coffee beans
Appliance placement	Built-in
Type	Coffee/Espresso
Product color	Black
Built-in display	No

Weight and Dimensions

Depth	455 mm
Width	200 mm
Height	325 mm