EasyManuals Logo

Melitta Latticia OT User Manual

Melitta Latticia OT
Go to English
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Care and maintenance
26
GB
Display Water hardness
soft, descale after 150litres

medium, descale after 100litres
 
hard, descale after 70litres
 
ashing
very hard, descale after 30litres
no
coee beans
A water lter is used. Adjustment is not
possible.
6.3 Setting switch-o rinsing
The appliance performs rinsing when
switched on and o.
We recommend that you do not perma-
nently deactivate the switch-o rinsing
function.
1.

Press the "Water/Service" button
for longer than 2seconds.
2.

Press the "Water/Service"
button repeatedly until the Drip tray
display lights up.
3.

Press the "Brewing Strength"
button to activate or deactivate the
switch-o rinsing.
4.
Press the "Water/Service" button
for more than 2seconds to save the
setting and exit service mode.
Press any direct key to exit service mode
without saving the setting.
Display Switch-o rinsing
activated
no coee beans deactivated
6.4 Setting the brewing
temperature
The brewing temperature inuences the
avour of the coee beverage.
1.

Press the "Water/Service" button
for longer than 2seconds.
2.

Press the "Water/Service" but-
ton repeatedly until the Steam Dispens-
ing display lights up.
3.

Press the "Brewing Strength"
button repeatedly until the desired
brewing temperature is set.
4.
Press the "Water/Service" button
for more than 2seconds to save the
setting and exit service mode.
Press any direct key to exit service mode
without saving the setting.
Display Brewing temperature
Low

Medium
 
High
7 Care and maintenance
Regular cleaning and maintenance of the
appliance ensures the consistent high
quality of your beverages.
Important! Unsuitable cleaning agents
can damage the appliance. Only use the
recommended cleaning agents.
7.1 Cleaning surfaces
Use a soft, damp cloth and a little washing
up liquid to clean the surfaces. Remove
external soiling immediately.
After you have emptied the drip tray and
the coee grounds container, rinse them
and, if necessary, also clean them with a
soft, damp cloth and a little washing-up
liquid.
You can remove residue from the coee
beans in the bean container with a soft
cloth. The cloth needs to be dry.
7.2 Cleaning the brewing unit
You should clean the brewing unit every
week.
1. Remove the cover by reaching into the
handle recess and pulling the cover to
the side.
2. Press and hold the red lever on the
brewing unit handle and turn the
handle clockwise until it engages at the
stop.
3. Pull the brewing unit out by the handle.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta Latticia OT and is the answer not in the manual?

Melitta Latticia OT Specifications

General IconGeneral
TypeAutomatic Coffee Machine
Milk SystemIntegrated Milk Container
Pump Pressure15 bar
Power1450 W
BrandMelitta
ModelLatticia OT
ColorBlack
Voltage220-240 V
Bean Container Capacity250 grams
One-Touch FunctionsCappuccino, Latte Macchiato, Espresso
MaterialPlastic

Related product manuals