Basic operation
58
GB
4 Basic operation
This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1 Switching the appliance on and o
Before switching on after starting up the appliance for the rst time, read
section 3.5 Switching on the appliance for the rst time on page56.
Information
When switched on and o, the appliance performs automatic rinsing.
During rinsing, rinsing water is also conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button(9).
» The welcome display appears on the appliance.
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.
Information
If the appliance was only switched o briey, there is no automatic rinsing
after switching on.
Switching o the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (9).
» The appliance performs automatic rinsing.
» The appliance switches o.
Information
The appliance switches o automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
The o time can be set in the Auto OFF menu, see section7.2 Setting Auto
OFF on page74.
If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.
To Next Page
Loading...
Need help?
General
