Melitta Passione OT - Changing Basic Settings; Setting the Language; Setting Auto off

Changing basic settings
74
GB
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Coee strength menu.
3. Use the arrow buttons to select the desired coee strength and conrm
with "menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The newly selected coee strength is used the next time an Espresso is
prepared.
7 Changing basic settings
Operating steps that change the appliance's basic settings are described in
this chapter.
7.1 Setting the language
The display text language can be set.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Language menu.
3. Use the arrow buttons to select a language and conrm with "menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.
7.2 Setting Auto OFF
If the appliance is not operated for a long time, it switches o automatically
after a specied time. This time can be set in the Auto O menu.
Setting the duration for Auto OFF
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Auto OFF menu.
3. Use the arrow buttons to select a time and conrm with "menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.