Permanently changing beverage settings
73
GB
1. Place two vessels beneath the outlet(6).
2. Press the "Two cups" button(29).
3. Continue as described for the relevant beverage preparation.
Information
The setting only applies to the single beverage that is prepared.
If a beverage is not prepared within 1 minute, the appliance switches to
single-cup dispensing.
6 Permanently changing beverage settings
The appliance oers further options for preparing coee specialities.
Default recipes can be used or the beverage settings can be permanently
changed.
6.1 Changing default settings
Depending on the beverage, the following default settings can be changed:
Coee amount: 25 ml to 220 ml
Milk amount or milk froth amount: 25 ml to 220 ml
Hot water amount: 25 ml to 220 ml
Coee strength: Very mild, mild, normal, strong, very strong
Temperature: Low, normal, high
Information
Changed default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
coee strength for an Espresso is described here as an example.
Direct keys
Espresso
Coffee strength
Strong
Confirm with OK:
Fig. 15: Setting the coee strength
To Next Page
Loading...
Need help?
General
