Care and maintenance
80
GB
3. Pull the brewing unit out of the appliance by the handle.
36
Fig. 18: Cleaning the brewing unit
4. Rinse the brewing unit thoroughly from all sides under running water.
» The brewing unit and the sieve(36) are free of coee remains.
5. Allow the brewing unit to drip dry.
6. Use a soft, dry cloth to remove coee residues from the surfaces inside
the appliance.
7. Insert the brewing unit into the appliance. Press and hold the red lever
on the handle of the brewing unit and turn the handle counter anti-
clockwise until it engages at the stop.
8. Close the cover. To do this, insert the cover and move the cover forwards
until it engages.
8.4 Using the "Easy Cleaning" programme
The milk system is rinsed using the "Easy Cleaning" programme.
Each time after a beverage has been prepared with milk, the appliance
requests you to execute the "Easy Cleaning" programme.
The "Easy Cleaning" programme can also be run manually.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
To Next Page
Loading...
Need help?
General
