Preparing beverages
69
GB
5.4 Preparing milk froth or warm milk
The preparation of milk froth and warm milk is similar.
Requirement: The ready symbol appears on the display and milk is con-
nected.
1. Place a vessel beneath the outlet.
2. Press the "Milk foam/Warm milk" direct key.
a) Milk froth = briey press button
b) Warm milk = press the button for longer (2 seconds)
» Milk dispensing begins.
» Beverage dispensing ends automatically.
3. Remove the vessel.
» The display shows: Easy Cleaning? (OK for start).
4. You can execute the Easy Cleaning programme or prepare further bev-
erages.
a) Execute the Easy Cleaning programme. To do so, follow the instruc-
tions on the display. Information on this is available in section8.4
Using the "Easy Cleaning" programme on page80.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
5.5 Preparing hot water
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Hot water" direct key.
» Hot water dispensing begins.
» Beverage dispensing ends automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
5.6 Preparing further beverage specialities with recipes
In addition to standard dispensing, you can select Recipes for further
beverage specialities in the menu. The following beverage specialities are
available here:
Beverage specialities without milk:
Ristretto
Lungo
Americano
To Next Page
Loading...
Need help?
General
