Preparing beverages
67
GB
5 Preparing beverages
There are two options for preparing beverages:
Standard dispensing as described below,
Selection and preparation of a recipe (see section5.6 Preparing further
beverage specialities with recipes on page69).
Information
The default settings for standard dispensing or for a recipe can be perma-
nently changed (see section6.1 Changing default settings on page73).
Please note:
There should always be sucient water in the water tank. If the ll level
is too low, the appliance requests you to rell it.
There should always also be sucient coee beans in the bean con-
tainer. If there are no longer any coee beans present, the appliance
stops the preparation of a coee beverage.
The appliance does not detect the level of milk.
The vessels for the beverages should be suciently large (see table
Factory settings on page90).
5.1 Preparing Espresso and Café Crème
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème" button.
» The grinding process and beverage dispensing start.
» Beverage dispensing ends automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
To Next Page
Loading...
Need help?
General
