Basic operation
66
GB
4.8 Emptying the drip tray and coee grounds container
After dispensing several beverages, the drip tray(8) and the coee grounds
container(7) can become full. The projecting oat(16) indicates the current
lling level of the drip tray.
After a specied number of beverages have been dispensed, the appliance
also shows that the drip tray and coee grounds container are full.
Always empty the drip tray and coee grounds container.
7
16
8
Fig. 13: Emptying the drip tray and coee grounds container
1. Pull the drip tray (8) forwards out of the appliance.
2. Remove the coee grounds container (7) and empty it.
3. Empty the drip tray.
4. Insert the coee grounds container.
5. Push the drip tray into the appliance until fully inserted.
Information
If you empty the drip tray and the coee grounds container while the appli-
ance is switched o, the appliance does not register this process. Therefore,
it is possible that you are requested to empty the containers although the
drip tray and the coee grounds container are not yet full.
To Next Page
Loading...
Need help?
General
