Melitta PASSIONE User Manual

First steps
63
GB
7
Fig. 5: ON/OFF button
Requirement: The appliance has been installed and connected.
1. Place a vessel beneath the Cappuccinatore.
2. Press the ON/OFF button (7).
» The appliance indicates that the water tank needs to be lled.
3. Remove the water tank. Rinse out the water tank with clean water. Fill
the water tank with fresh water and insert it.
» The lighted display indicates that the rotary regulator must be actu-
ated.
4. Turn the rotary regulator on the control panel clockwise up to the stop.
» Hot water ows out of the Cappuccinatore.
5. When water no longer ows out of the Cappuccinatore, turn the rotary
regulator anti-clockwise to the stop.
» Hot water ows out of the outlet.
» The appliance is vented.
6. Fill coee beans into the bean container (see section4.3 Filling coee
beans into the bean container on page65).
7. As required, you can now either
a) set the water hardness (see section6 Changing basic settings on
page76) or
b) use a water lter (see section7.6 Using a water lter on page91).

Melitta PASSIONE Specifications

General

Capacity	1.2 liters
Pump Pressure	15 bar
Power	1450 watts
Auto shut-off	Yes
Keep-warm function	No
Water level indicator	Yes
Removable water tank	Yes
Permanent filter	No
Type	Espresso Machine
Coffee Bean Container Capacity	125 grams