Preparing beverages
72
GB
5.3 Setting the coee quantity
The coee quantity can be specied by selecting a direct key.
Direct key Coee quantity (factory setting)
40 ml
120 ml
200 ml
The preset coee quantity can be changed from 25ml to220ml:
Requirement: The appliance is ready for operation.
1. Press the desired direct key for longer than 2 seconds.
» The quickly ashing display indicates that the programme for setting
the coee quantity is running.
» The grinding process and beverage preparation start.
2. Press the selected direct key again as soon as the desired coee quan-
tity is reached.
» Beverage dispensing stops.
» The appliance saves the new coee quantity.
» The appliance is ready for operation.
Information
The coee quantity can be reset to the factory settings (see section6.6
Resetting the appliance to the factory settings on page80).