Melitta PASSIONE - Using Milk with the Cappuccinatore; Emptying Drip Tray and Grounds Container

Basic operation
69
GB
1. Connect the Cappuccinatoreto the steam pipe(12). Slide the connec-
tion of the Cappuccinatore to the stop(27) of the steam pipe.
2. Connect the milk hose(22) to the Cappuccinatore.
3. If you do not want to use milk, clamp the milk hose in the holder(20).
4.7 Using milk
Use cooled milk for optimum coee enjoyment.
28
22
Fig. 10: Commercial milk pack
1. Remove the milk hose(22) from the holder (20).
2. Insert the milk hose into a conventional milk pack(28) or into a vessel
lled with milk.
4.8 Emptying the drip tray and coee grounds container
After several beverage dispensing processes, the drip tray(6) and the coee
grounds container(5) can become full and must be emptied. The projecting
oat(15) indicates the current lling level of the drip tray.
After a specied number of beverage have been dispensed, the appliance
also shows that the drip tray and coee grounds container are full. Always
empty the drip tray and coee grounds container.