Melitta PASSIONE User Manual

Care and maintenance
88
GB
7.5 Running the descaling programme
The descaling programme is used to remove limescale deposits in the inte-
rior of the appliance with fully automatic coee maker descaling agents.
To avoid damage to the appliance, we recommend running the "Descaling"
programme every 3 months or as requested by the appliance.
The descaling programme takes approximately 25 minutes and should not
be interrupted.
CAUTION
Contact with fully automatic coee maker descaling agent may lead to
eye and skin irritation.
 Observe the processing instructions on the packaging of the fully auto-
matic coee maker descaling agent.
CAUTION
Hot water and hot steam owing out of the pipe
 Do not touch the steam pipe during and immediately after use.
 Wait until the steam pipe has cooled down.
ATTENTION
Use of unsuitable descaling agents and failure to observe the processing
instructions may damage the appliance.
 Only use Melitta® ANTI CALC liquid descaling agent for fully automatic
coee makers.
 Observe the processing instructions on the packaging of the descaling
agent.
ATTENTION
A water lter may be damaged if it is screwed in during the descaling
programme.
 Remove the water lter.
 Place the water lter into a vessel lled with tap water during the desca-
ling programme.
 The water lter can be reinserted and reused when the descaling pro-
gramme is complete.
Requirement: The appliance is ready for operation. 0.5 litres of descaling
solution has been prepared and is ready for use.

Melitta PASSIONE Specifications

General

Capacity	1.2 liters
Pump Pressure	15 bar
Power	1450 watts
Auto shut-off	Yes
Keep-warm function	No
Water level indicator	Yes
Removable water tank	Yes
Permanent filter	No
Type	Espresso Machine
Coffee Bean Container Capacity	125 grams