Melitta PASSIONE User Manual

Changing basic settings
79
GB
Requirement: The service mode is called up.
1. Press the "Service" button repeatedly until the display for the water
hardness service mode appears.
2. Press the "Coee strength" button repeatedly until the desired water
hardness is set
.
3. Call up the next basic setting in the service mode or exit the service
mode:
a) Briey press the "Service" button to navigate to the next basic
setting.
b) Press the "Service" button for longer than 2 seconds to exit the
service mode.
» The new setting for the water hardness is stored.
6.5 Setting the brewing temperature
If the adjacent display lights up in the service mode, the brewing tempera-
ture can be set.
The brewing temperature inuences the avour of the coee beverage. The
brewing temperature can be set to your requirements as follows:
Display Brewing temperature
Low
Medium
High
Requirement: The service mode is called up.
1. Press the "Service" button repeatedly until the display for the brewing
temperature service mode appears.
2. Press the "Coee strength" button repeatedly until the desired brewing
temperature is set.
3. Call up the next basic setting in the service mode or exit the service
mode:
a) Briey press the "Service" button to navigate to the next basic
setting.
b) Press the "Service" button for longer than 2 seconds to exit the
service mode.
» The new brewing temperature is stored.

Melitta PASSIONE Specifications

General

Capacity	1.2 liters
Pump Pressure	15 bar
Power	1450 watts
Auto shut-off	Yes
Keep-warm function	No
Water level indicator	Yes
Removable water tank	Yes
Permanent filter	No
Type	Espresso Machine
Coffee Bean Container Capacity	125 grams