Memmert HPP - Sound

D24030 | Date 11/2018 57
Menu mode
7.7 Sound
In the Sound display, it can be define whether or not the appliance should emit acoustic
signals and, if yes, on which events:
► on the press of a key
► at the end of a programme
► on alarm
► if the door is open
1. Activate the acoustic signal adjustment.
To do so, press the activation key on
the left side of the
SOUND display. The
display is enlarged. The first category (in
this case
Key sound) is automatically
highlighted. On the right, the current set-
tings are shown on.
Sound
Keysound
At the end
If door open
On alarm
If you want to edit another list entry: Turn
the turn control until the respective entry
– e.g.
If door open (Special accessories) –
is highlighted in colour.
Keysound
At the end
If door open
On alarm
2. Save the selection by pressing the confir-
mation key. The adjustment options are
automatically highlighted.
Keysound
At the end
If door open
On alarm
3. With the turn control, select the desired
setting – in this example OFF () .
Keysound
At the end
If door open
On alarm
4. Save the setting by pressing the confir-
mation key.
If an acoustic alarm sounds, it can be
turned off by pressing the confirmation
key.
Keysound
At the end
If door open
On alarm