ower heat
fresh air
0
1
2
3
4
5
6
alarm set
UE/BE 200-800, SE 200-400, ULE/SLE 400-800
15
9.5 Switch-on delay and hold time
dependent on set temperature
Example:
The cabinet has to start heating to 150°C
after a 2 hour delay and shut down after 3
hours of operation at the set temperature.
The fan should not run.
9.6 Programming of a switch-on delay
and hold time with Loop-function
Example:
The cabinet has to start heating to 150°C
after a 2 hour delay, cool down to room
temperature after 3 hours of operation
(including heat-up time) and repeat this
pattern over and over.
The fan should run continuously.
To Next Page
