Mendota FV33i-PF2-0113 - General Specifications and Clearances

4
SPECIFICATIONS
MODEL FV-33i
Natural Gas
Propane Gas
Input rating (Btu/hr) 0-610 m
31,000
31,000
Minimum input (Btu/hr) 0-610 m
10,000
13,000
Orifice size (DMS) 0-610 m (front/rear)
49/45
3
/
64
”/
3
/
64
”
Manifold pressure (in. w.c./kPa) > High Fire
3.5/0.87
10.0/2.49
Manifold pressure (in. w.c./kPa) >Low Fire
1.7/0.42
6.3/1.57
Minimum inlet pressure (in. w.c./kPa)
5.0/1.24
11.0/2.74
Air shutter settings (in)
1/16”
¼”
EFFICIENCIES ................................ .EXCEEDS D.O.E. EFFICIENCY REQUIREMENTS (A.F.U.E.)
FLUE VENT LINER ........................... .CO-LINEAR - 4” DIAMETER EXHAUST & 3” DIAMETER INLET
..................................................... Minimum Vent Length is 10 feet. Maximum Vent Length is 70 feet.
NET WEIGHT .................................. .165 lbs.
SAFETY .......................................... .AGA CERTIFIED, ELECTRONIC IGNITION IPI SYSTEM
ACTIVATED WITH THERMOSTATIC REMOTE CONTROL.
GAS REQUIREMENTS ...................... .SUPPLY PRESSURE: GAS INLET: 3/8" N.P.T.
NAT. GAS: 7" W.C. [5.0" W.C. MIN., 11" W.C. MAX.]
L.P. GAS: 11" W.C. [11" W.C. MIN., 13" W.C. MAX.]
ELECTRICAL REQUIREMENTS ...... 120 Volts AC, 2 Amps
LISTINGS - INTERTEK TESTING SERVICES TESTED TO: ANSI Z21.88-2005 – CSA2.33-2005 – CAN/CGA 2.17-
M91
Gas appliances must be tested and certified by a nationally recognized testing and certification agency to Ameri-
can National Standards Institute - ANSI Gas Appliance Safety Standards. . The Mendota Gas Fireplace Insert has
been tested and certified by Intertek Testing Services. 8431 Murphy Drive, Middleton, WI 53562.
INSERT INCLUDES CERAMIC COMBUSTION SYSTEM, DUAL HOT AIR BLOWERS, PREMIUM 8-PIECE FIBER LOG SET & COALS, NEO-CERAM
GLASS,THERMOSTATIC REMOTE ELECTRONIC IGNITION, AGA CERTIFIED SAFETY SYSTEM.