Activating and deactivating Active
Brake Assist
When you start the engine, Active Brake Assist is
automatically activated.
Active Brake Assist is deactivated automatically
if:
R
there is a malfunction
R
ABS is deactivated or there is a malfunction in
the brake system of the vehicle
X
To deactivate: press the l button.
When the l indicator lamp in the instru-
ment cluster lights up, Active Brake Assist is
deactivated.
X
To activate: press the l button for
approximately 1 second.
When the l indicator lamp in the instru-
ment cluster goes out, Active Brake Assist is
activated.
Collision warning and emergency braking
Overview
:
Active Brake Assist warning
;
Active Brake Assist partial braking
=
Emergency stop (full brake application)
?
Emergency stop completed
If a collision warning appears in the on-board computer when the vehicle is in motion:
X
Pay particular attention to the traffic situation.
X
Depress the brake pedal.
If there is a risk of a collision with the vehicle in front and Active Brake Assist issues a warning, the
audio device and/or hands-free system installed at the factory are automatically muted.
286
Driving systems
Driving mode
To Next Page
Loading...
Need help?
General
