4. Verify the shift handle is in the neutral (N) position.
5. Verify the throttle grip is set to the idle position.
6.
Manual starting models ‑ Pull the starter rope slowly until you feel the
starter engage, then pull rapidly to crank the engine. Allow rope to return
slowly. Repeat until the engine starts.
IMPORTANT: Outboards with battery charging capabilities must not be
operated with battery cables disconnected from the battery. Damage to the
charging system may result.
7.
Electric starting models ‑ Push the starter button and crank the engine.
Release button when the engine starts. Do not operate the starter motor
continuously for longer than ten seconds at a time. If the engine fails to
start, wait 30 seconds and try again.
OPERATION
58 eng
To Next Page
Loading...
