NOTICE
Inspect the position of the hose clamp located on the fuel hose to ensure
that it will not chafe or cut into the adjacent wiring harnesses.
a - Cable tie
Description Nm lb‑in. lb‑ft
Screws for attaching the rigging
adapter
6 53
REMOTE WIRING HARNESS
Route the remote 14 pin boat harness through the rigging grommet. Connect
the remote harness to the 14 pin connector on the engine harness. Fasten the
harness with the retainer.
a - Remote 14 pin boat
harness
b - Retainer
c - 14 pin connector
To Next Page
Loading...
